4K

Insulated Rail Seal

ISW

In our workshop, insulated rail joint systems are manufactured to high standards.

Insulated Rail Joint Coupons:
System with increased durability (fish plates, adhesive and insulation components) Dimensional and electrical resistance tests to ensure tolerances in accordance with all railway standards Electrical resistance examinations to secure MOhm values ​​according to railway norms.

We continue to offer reliable and durable solutions in railway systems. With insulated rail joints, we take quality to the next level in modern railway infrastructure.

Insulated Rail Seal

ISD

The insulated dry joint uses an insulation process that meets the requirements.

- High-strength rail fastening with pre-insulated, coated fishplates
- Strong and durable system by using steel fishplates
- Simply assembling by process only be screwing

Insulated Rail Seal

ISR

The repair kit for insulated joints can be used for 25 repairs.

-Repair kit for worn insulating end posts
-Fast, easy, safe process to renew the insulating end post and close/filling cracks nearby
-Complete kit with all necessary materials
-According to the air and rail temperature, curing of the adhesive is possible in 10 to 20 minutes

Insulated Rail Seal

ISB

The Kits for Insulated Joints are supplied with precoated fishplates. The KIT is supplied with either a 1-hour.

- Insulating coating produce in ALMAR plant Rail and fishplates tolerances adapted on each joint
- System for very short track closures. Can be installed on site or directly in the track in only one hour.
- Secure insulating layer on the fishplate with constant thickness.
- Simple execution thanks to a safe installation process

Insulated Rail Seal

ISB

Insulated kit joint are provided with the fishplates coated with insulated component. The KIT is supplied with either a 1 hour drying glue or 7 hours drying glue to be used in track or on site. The fastening components are adapted to the Railways norm requirements.

- Insulating and gluing components compatible for fastening process
- Gluying process save 70% of quantity of glue

List of components : 2 insulated fishplates, 4 or 6 Bolts + washers, 4 or 6 insulating rims, Glue + hardener, 1 end post rail profile

In accordance with our customers and the desired products, we conduct training sessions for the installation. In this way, the production employees are trained to install our products with all the important know-how.

Insulated Rail Seal

ISK

The Kit for Insulated Polymer Joints is made of reinforced glass fibre composite material.

- Ideal for temporary integration into the safety system where the position of the bonded joints has not yet been determined
- For tracks with less traffic and lower axle loads
- Simple assembly by screwing only
- The ISK system is used at speeds of up to 40 km/h
- Does not require gluing

Insulated Rail Seal

The table below provides general information about Insulated Rail Seals.

' Insulated Rail Seal: Secures Your Line '